Home > Products > Electric Vehicle Parts > High Voltage Coolant Heater

Products

High Voltage Heater Automotive

Name: High Voltage Heater Automotive
Brand: Nanfeng
SKU: 187309077

High Voltage Water Heater are capable of providing heat to the cockpit for safe defrosting and defogging, or to other mechanisms that require temperature regulation.

Send Inquiry

Description

High Voltage Heater Automotive

Product Description

PTC heater

The PTC heater adopts PTCR heat-sensitive ceramic element, which is composed of several single pieces combined with corrugated heat-dissipating aluminum strips through high-temperature adhesive bonding, which has the remarkable advantages of small thermal resistance and high heat exchange efficiency.

Its biggest feature is its safety, that is, when the fan fails and stalls, the power of the PTC heater will automatically drop sharply due to insufficient heat dissipation. At this time, the surface temperature of the heater is maintained at about the Curie temperature (generally 240°C), so as not to cause the "redness" phenomenon on the surface of the electric heating tube heater, which eliminates the hidden danger of accidents.

Product Parameters

Item	WPTC-10
Heating output	2500±10%@25L/min, Tin=40℃
Rated voltage(VDC)	220V
Working voltage(VDC)	175-276V
Controller low voltage	9-16 or 18-32V
Control signal	Relay control
Heater dimension	209.6123.480.7mm
Installation dimension	189.6*70mm
Joint dimension	φ20mm
High voltage connector	ATP06-2S-NFK
Low voltage connectors	282080-1 (TE)
Overall protection level	IP67
Heater weight	1.95±0.1kg

ptc heater

Precautions

For the voltage requirements of 170~275V, the PTC sheet adopts 2.4mm thickness, Tc245℃, to ensure good withstand voltage and durability, and the internal heating core group of the product is integrated into one group.

In order to ensure the protection level of the product IP67, insert the heating core component of the product into the lower base at an angle, cover the nozzle sealing ring, press the rear exterior with a pressure plate, and then seal it with potting glue in the lower base, and seal it to the D type. upper surface of the tube. After assembling other parts, use a gasket to press and seal between the upper and lower bases to ensure good waterproof performance of the product.

Product details

Installation Precautions

Instructions

1.Before power-on, pay attention to the installation is firm, and the connectors are connected reliably.

2.The grounding wire is connected reliably to prevent static electricity from damaging components.

3.Antifreeze should not contain impurities to prevent clogging of the water tank.

4.After unpacking, be sure to check whether there is any appearance damage caused by transportation. Damage caused by improper installation and use (including use and installation conditions beyond the scope specified in the specification) is not covered by the warranty.

Certification